Pentair Fns Plus 48 sqft De Pool Filter (In Ground Pool) "remove stuck spa pump impeller" Questions

stuck on the motor shaft you need to pull the motor thru-bolts and remove the rotor with the pump still attached from the stator. Lock the rotor in a vice and turn the impeller off with a large set of

...remove pump from engine. Impeller is stuck and flanges have broken. There is no center bolt in impeller. How do I get it off? try placing a couple of wraps of friction tape around the impeller body ...

...stuck and will likely break but you have to remove it to change the seal. It is not uncommon to need to replace the impeller when the seal fails since the water gets behind the impeller shaft and ...

...remove the diffuser (plastic housing that goes around the impeller) usually by a series of 3 to 6 small screws. Now you can easily try and spin the impeller and check for obstructions that might have ...

...can remove the impeller by turning it counter-clockwise. They can get stuck on the threads and you may need an impeller wrench or something suitable to give you some mechanical advantage to remove

...Remove the pump, I think you will have a damaged impeller or something stuck in the chamber. I once found a dime in the chamber that made a $1.00 worth of racket! I hope this helps you a Check for ...

...remove a stuck impeller without damaging the shaft I would like to change the mechanical water pump seal but having problems removing impeller seems to be stuck & don't want to damage the ...

stuck motor: try to reach past the strainer to the impeller and turn it. If you can't do that, remove the electric end cover and find a double flat for a wrench where the shaft goes into the motor. Or

...Remove it to find the end of the shaft. Depending on the motor brand and age you should have either a flatted surface for a wrench or a slot for a screwdriver to secure the shaft from turning. Turn ...

...stuck or clogged impeller. You need to remove the bottom and check that the impeller is clear and be sure it spins freely. If you can spin it and it stops when you plug it in then the motor has gone ...