...pool. You will probably only to use the FILTER, BACKWASH and maybe the RINSE valve position. The RINSE position is not as important as indicated by the fact that many backwash valves don't have a ...
...filter and pool. RECIRCULATE b> PUMP - RETURN For bypassing filter, but circulating pool water. May be plumbed for "off-system" pool water access. Ideal for Jet-Air® fittings. WINTER b> ...
...backwash the filter from main drain until sight glass is clear-this will reduce filter pressure. After backwashing return gate valve to filter position, then filter from main drain only. check water ...
...pool filter After you have backwashed your filter until the site glass run clear. Go to rinse mode for 30 seconds. Make note of the filter pressure. Don't backwash until the pressure goes up 10 psi!! ...
...filter back into the swimming pool. You may need to alternate between the rinse and backwash settings until the water runs clear in order to unblock your filtration system and flush out clogs. To ...
...filter seems to run fine. water level must be about the discharge (eyeball) in the pool to back wash. Check the hose connections to make sure that hoses off the the filer head are going to the right ...
Question about Pentair Pool & Spa
filter, all new grids and top still won't backwash....pool is cloudy....what's the trouble??? When I backwash, the sight bubble stays clear....no dirty water is being pumped out of the filter.
...pool and put it back to filter and it will not ****. Thanks Rob After your pool filters on the "backwash" setting, you should move it to the "rinse" setting. With the pump off, set valve to rinse. ...
20 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions