pump for 12 hrs and 10 to 11 hrs of chlorinator. Before you do this... Clean your pool and get the slimmy stuff out... Start with a clean filter and run the cycle i just stated. You should see results
pump on and run it for a few seconds(15-20) Repeat this until water runs clear. Close valve and then add DE, If that does't solve the problem. filter needs to be disassembled, cleaned and acid washed.
...Clean the pump strainer AND skimmer basket. Make sure that the impeller is not jammed or clogged. Cleaning with a stiff wire brush through the pump strainer opening will usually work. The alternate ...
pump quietly runs, so I believe that I can eliminate that. The sweep, nor the outlets still do not work. Any ideas of what to try next? ([email protected]) Thanks for reading. A pump motor running
clean. I suggest you get at least one extra cartridge. Run the pump until you notice a decrease in the flow. Change the cartridge, go wash the filter you took out. Repeat until you get the water clean
...clear. Flow resumes if pump is set to quick clean or if I stop/restart, but then the problem reappears. go to utube see the video on your pump programming sounds like you have the run time on 1200 ...
...clean. Ran hose through the system (the pump) and the water returns back into the pool, so don't seem to be a blockage. Turned the pump off several times and restarted it to see if the pump ...
21 questions posted
Usually answered in minutes!
1,045 Questions
287 Questions
93 Questions
43 Questions
29 Questions