Jandy STEALTH 1 HP POOL PUMP 115230V "remove wet end spa" Questions

REMOVE WET END FROM MOTOR ON FLO-MASTER XP2 You will need to remove the six bolts/nuts on the wet end to expose the impeller. At the rear of the motor, remove the cap covering the shaft and restrain ...

remove the wet end and then the impeller which may be difficult. I just figured out how to do this. See "http://www.fixya.com/support/t6782638-remove_impeller_aquaflo". Again, check the shaft for rust

...wet end. Remove diffuser from wet-end using a flat blade screwdriver. Remove impeller screw by turning clock-wise(this is a reverse threaded screw (some impellers dont have an impeller screw)) Remove ...

Removing Impeller What direction does the impeller come off to replace, Rotation is clockwise right tight left off Impellers unthread counter clockwise.

...wet end of pumps come off this way. Remove the face plate of the pump.Put a large flat-head screw driver on the back of the motor on the shaft going thru the motor.Grasp the impeller (with the screw ...

...wet end from motor take off cover to impeller unscrew impeller screw should be backwards thread hold back of motor with wrench after screw is out turn the impeller off should be regular threads use ...

removed four bolts,can not get motor off depending on the pump you have, you'll need to remove the seal plate from the wet end and remove the impeller before you can remove the motor.

...remove the wet end from the motor OR is there some way to remove the wet end of a white JWB 60C Ser no. 06785 jacuzzi pump that is attached to a Gould 1 HP motor - the flanges seemed solvent welded ...

...wet end of pump down to the impeller. Remove the shaft cap at the back of the motor(small circular cap in back). use 7/16" wrench to hold the shaft under the cap whiile spinning the impeller counter ...

remove the cover of the wet end, and expose the impeller, then remove the impeller, and expose the shaft seal, we would be able to assist you better. A picture of the wet end and post it, will greatly