Jandy AquaLink RS OneTouch RS16 Pool or Spa Only (Pump Heater + 16 Aux) RSP16 () "aux heater" Questions

Ad

Question about Jandy Pool & Spa

1 Answer

how to wire the Aux 1,2 & 3 relays for Blower, spa light and pool light. which ever you have wired to each relay connect the correct relay red and black connector then go to system setup and ...

Ad

Question about Jandy Pool & Spa

1 Answer

...my RS8 system. Any sugestions on where I can purchase just the circuit board? Mike unplug all the aux plugs but mark them replace fuse turn on if it still blows need a new board if not plug in auxs ...

Ad

heater on.How do I stop it? you have to go into set up sounds like your acuator for spa is highlighted with the aux that your blower is set on uncheck it from that aux also check jva assignment if you

Question about Jandy Pool & Spa

1 Answer

filter pump can turn on but cannot turn off automatically as program. make sure you are not using the maintain mode for heater do you have a run time on and off?

Question about Jandy Pool & Spa

1 Answer

I have a Jandy Aqualink RS8 Wireless One Touch system that is not operating right. Auxiliary 3 is not working at all. Each time the filter pump automatically begins, three other auxiliaries (5, 6 and ...

Question about Jandy Pool & Spa

1 Answer

Jet pump and spa heat enable on their own Check your time settings. It sounds like the Spa Mode has been set to run at given times and with heat enabled the heater will automatically turn on when the ...

My Aqualink rs8 says it is non programable. My filter pump comes on but the filter light does not turn on and I can no longer control the filter pump from the control system. I have to physically go ...

Jandy one touch, bought the system one year ago. Programmed from 9 am to 5pm. Whenever we heat the spa (3pm)for a short while then filter pump turns off as well. Also after touching the air blower ...

How do I reverse a lockout of aux 1 polaris? Turned off polaris after pool was shut down for repairs. I need to turn the aux back on after a lockout was set by me. I tried to follow promps but cant ...

Question about Jandy Pool & Spa

1 Answer

...cleaned, in spa mode water in pool lowers but does not return to previous lever. 2 one of the aux links/buttons, which is used for turning on/off landscaping lightening, does not work eiother

Not finding what you are looking for?
Jandy AquaLink RS OneTouch RS16 Pool or Spa Only (Pump Heater + 16 Aux)  RSP16 () Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Jandy Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

13524 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jandy Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...