you do it that way, there will be no sound getting into the Teac DVD setup since standard 4 pin S-cable carry only video signals (luminance & chrominance) and no audio component/
signal. If you run an RCA cable pair from the cable box's audio out aside from the S
more...
no
signal optoma ep739 Hi, I connected the projector to my pc, It shows the windows logo but after that shows "no
signal" resolution is 1024
more...
power off Panasonic PT-AX100U shuts off ~2.5 minutes after turned on. Requires master switch off and on again to respond to remote. No error
signal of any sort. Thanks for the attention and input. Lamp has little over 500 hours (much lower than the specified lifetime). Made sure the
more...
and the keys do not respond, yet the unit is on. I can not get anything to work, and it does not detect any
signal. Please help, is there a safety lock that has been triggered for unit not to display?
more...
B . Attach the secondary screen. If you are using a Notebook - do the same as above. If it doesn't pick up the
signal on it's own , hold down the Fn ( function ) button - situated left of your spacebar and in you F-row buttons press
more...
LCD projectors can have a green tint for a fiew reasons. Either the
signal processor is out which can cause all sorts of funkyness, or the lcd panel itself is not seated properly. Also the memory driver for
more...
no in depth complaint. I set it up and face it against the wall and power it up. It turns on, finds a a
signal and is fine. for 86 seconds. the problem has repeated itself many times, and i went ahead and pulled the fans and vents and
more...
Sponsored Links