lamp life used but my lamp light is on...is this normal? That light is there to tell you that the lamp is close to the end of its useful life. It simple monitors the amount of current that the lamp is
Question about InFocus Office Equipment & Supplies
THE THING SAYS LAMP LIFE HAS EXPIRED CAHANGE LAP THE THING SAYS LAMP LIFE HAS EXPIRED CHANGE LAMP BUT IT STAYS ON..WHAT IS THE PROBLEM?? reset the lamp timer. go into the menu options under settings.
...about 30 seconds the fan slows down and the Ready light comes on again. Lamp is near end of life. Try reseting lamp timer and order new lamp if unit stays on the lamp may be at the end of it's
Question about Optoma Office Equipment & Supplies
...underside,reflectors or mirrors.Clean with glass cleaner. Dave,, Ulster,, Northern Ireland,, Did you reset the lamp hours in the menu? I believe it checks lamp life by how many hours it has been
...Lamp life varies by manufacturer and projector type. Lamp life also depends on the projector's environment: air flow, clean air, and also on the level of usage. Check the user's manual or ...
Question about Sanyo Office Equipment & Supplies
...lamp life on a sanyo plv-z2 bulb and how to read the bulb life there are 3 numbers that come up when i check it If I remember correctly, you hold down either the power or the menu button for 30 ...
Question about Mitsubishi Office Equipment & Supplies
done over 1000 hours it has done well. If the projector is ceiling mounted, the air is very hot up there and the lamp life will be greatly reduced. Is the lamp life indicator flashing? Hope that helps
lamp life has exceded its safe limit and engaged a permanant standby mode. I had an old NEC which I had to hold the off button down for 20 seconds and that reset the lamp life. You could try this. Not
...Solution: 1. Clean or replace the air filter. 2. Check the lamp run time. If the lamp time has reached its end of life, replace the lamp. Use the manual to do the above steps. Keep me posted. ...
...lamp life indication message is constantly on at startup of projector until I press the menu button. I have changed the lamp but the message continues to show up each time I start the projector. I ...
13 questions posted
Usually answered in minutes!
401 Questions
267 Questions
218 Questions
181 Questions
164 Questions