...wont power up We were watching a dvd and the projector shut down now it wont power up. Hello : Check your fans, The projector will not power up if either of the fans have failed . A defective ...
and also into my computer, and my LP360B wont turn on. no green LED's saying that it has power illuminate, nothing. what's the problem? thanks. power supply needs replacing. check the fuse on it first
wont power up optoma movie time replaced color wheel now unit wont power up it's probably not this: Try using the remote to turn it on. I cleaned out mine a while ago and the controls on the main unit
Question about Toshiba Office Equipment & Supplies
...wont go away. what can i do about that Unplug your projector from the power source. Hold down the On/Standby button and the Menu buttons at the same time and plug the power back in as you are holding ...
...wont power up. My NEC VT660K Projector wont power up. The lights don't even go on. All that happens is a small beep coming from the bottom of the projector it beeps approx. once a second. Any ideas? ...
Wont power on It acts like it has no power, have checked outlet and outlet has power. there is an internal power fuse, a thermal overload fuse. the lamp must also be installed
Question about InFocus Office Equipment & Supplies
...If bulb burns out will the unit still power-up? Yes it should power up and indicate that the bulb wont work. If the bulb has been used way past the first warning message then it may not power
...wont power. took it ALL apart checked the fuse..says it's good, anyone have any clues? Check you lamp door, and the interlock switch. If thats ok, looks like your power supply needs to be repaired or ...
Question about InFocus Office Equipment & Supplies
my infocus sp5000 projector wont power up. When I push the power button, which has the solid green light on...it just goes right off. you need to replace the power supply.
...cable but the box is still dead, no sign of any power input. try another wall outlet if that dosent work try a nother cord, than if it still wont respond it could be a blowed fuse or a bad power
3 questions posted
Usually answered in minutes!
35 Questions
33 Questions
22 Questions
14 Questions
16 Questions