...size. If the faucet is a Hansgrohe the hose ends should be 3/8". If they are straight ended with no nut on the end they will connect using a 3/8" nut and ferrule just the same as an old style soft ...
...and rusted so how can I remove it to replace the faucet. if yu know the size of the nut, go to any of the auto supply store and get a 90 degree box or open end. most likely is either 1/2 or
...up picture of this faucet to see what parts can be replaced. I am in England and cannot buy a replacement nut. We lost the original one.where can I buy one? They don't do the right size in
...need cleaning periodically. Undo the nut where the water comes out from the tap, use an appropriate sized spanner, remove meshed filter, clean under running water and replace. Hope this ...
Question about Hansgrohe Plumbing
...size phillips screw driver and tighten the screw Put tab back o and you are done If they work loos again remov e tabs, screws put loctite ( You can get a small tube for m ace or hd) screw threads and ...
...the handle is off you will see the nut holding the cartridge in place. You will need the proper size wrench to get this off. Remember "right is tight and left is loose". Joe Thanks for choosing
...nut that needs tightened down , then put the lever back on . Ehh? If it's loose there's already a problem with the internal parts. Open it up & bring the parts with you to a hardware store. Get a ...
...nut. loosen it het a new rubber at plumbing shop of same size[cheep] put it back in and tight. no2 u must remove the rubber attached to the brass rod all together and go to shop end get that part, ...
size of a pencil erasure) that covers acces to a hex key screw that you have to remove to remove the handle once you have removed the handle you will need a large adjustable wrench to turn a large nut
...size are these fittings? The fittings on the hot/cold supply hoses will be 3/8". If you have straight ends on the hoses you will need 3/8" nut and ferrules to connect to your 3/8" service stops. They ...
7 questions posted
Usually answered in minutes!
0 Questions
1 Questions
0 Questions