Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18" "cranks run chain" Questions

What makes a chain saw run full blast? Once cranked, chain saw runs only at full throttle. i suggest the throttle lincage is disconected or the spring is broken

chain wont stop First off reduce the idle spped with the adjuster screw, if the chain still runs at low idle, it is most likley either the clutch spring has become weak and the shoes are engaging ...

...chain oil, sit the saw on the ground with the bar away from any obstructions, engage the chainbrake, switch the ignition on, press the fuel bulb as many times as it takes to 3/4 fill the bulb, pull ...

run consistently. Sometimes it will start easily enough and will rev high until warmed up then will cut out with the choke off or if I try to use the throttle. Other times it takes a few good pulls to

...chain saws and a blower that now will not run right I think bad fuel is the probelm? Now what besides running new fuel should I do anything else? ADD A SMALL AMOUNT OF FUEL ADDITIVE INTO TANK TO HELP ...

...chain saw cranks up but will not keep running. This is an older craftsman 10" saw & does not have a primer on it. Either you have a air leak fuel inline or at fuel tank or a plugged up carb- sour ...

No chain tesion adjustmen older (yellow) Remington EL.1 chain saw I have and older (yellow) Remington EL.1 chain saw (yard sale for $5!). Runs like a champ but no chain tension adjustment mechanism. ...

...chain slips -- maybe clutch issue The engine runs fine, but the blade will not run fast to cut wood. It worked fine today, and then after letting it set for 30 minutes the engine started up fine, but ...

I have difficulty starting my Gardenline 49.3cc chainsaw. Please let me know what the correct starting proceedure is. Genral starting procedure on a chain saw is as follows, put fresh fuel into the ...

46cc cranks but wont keep running if trigger is released after cranking you must keep trigger fully engaged or saw will shut off. Has a hard time reving up to top speed at first. The small ports and ...