Poulan 14" Chainsaw "replaced carb won" Questions

...carb it will start but won't keep running. Replace the fuel filter in the tank, check the fuel hose up to the carb for signs of leaking, if so replace the line, between the cylinder and the carb ...

...won't work properly. Pick up a carb kit and rebuild it (if parts available) and then you should be good to go. If you can't rebuild the carb, a replacement will run you 30 bucks or more. Have ...

...won't turn over took off the muffler and added gas/oil direct to cylinder and she cranked up for two secs and dies If the saw briefly runs when you prime the carb and/or cylinder with gas then ...

won't stay running. when I pull the trigger to run the chain it dies There is some obstruction in the main jet or fuel supply. You need to strip the carb and clean it out, prefereably replacing ...

...won't pop back and gas is leaking somewhere. Where do I check? The bulb pulls fuel from the carb, so there is either a kink in the hose from the carb to the bulb, or there is a blockage in the ...

#39;t run without full choke on and gas trigger wide open, won't idle without dieing? Fuel starvation, start by replacing the fuel filter in the tank, check the fuel hoses for leaks up to the carb

...fuel and if fired right up. But won't run. You need to clean out the carb. possibly replace the Needle Valve and check the Diaphram for stiffness. Also check the fuel line for cracks and

...Replaced carb, sp plug, ign module. I replaced the carb, spark plug and the ignition module. Has what I would call a mild spark at the sp plug. I set the clearance between the ig module and the ...

...Replaced fuel filter. Now won't start ?? There is an internal filter in the carb itself, under the pump cover normally held with a single screw, also check the fuel hose for ant signs of leakage, ...

...replaced the primer bulb. Now the chainsaw won't keep or looses the prime. Now when you prime there is no fuel mixture . What causes this? Are you sure you have conected the pipes the correct way ...