Husqvarna Chain Saw Handle Models 362 365 371 372xp "gap ignition module flywheel" Questions

...ignition module. You need to use a thin business card to set the pole gap at the module--access the flywheel/module area again and turn the flywheel magnets under the module poles. Insert a thin ...

...ignition module. Set the module pole gap by turning the flywheel magnets under the module, insert a thin business card into the pole gaps, loosen the module screws to allow the module to contact the ...

ignition switch wire from the module (not the one tied to the module metal frame), and try for spark again. Check the module pole gap with the flywheel magnets just under the module poles using a thin

...ignition module pole gap to the flywheel. Rotate the flywheel magnets under the ignition module poles, and use a thin business card for a gauge. With the card in place, loosen the module screws and ...

gap. Make sure ignition switch is on. If still nothing, remove the cover from the flywheel. Set the ignition module gap by using a thin business card between the module poles and the flywheel magnets.

...ignition switch wire from the module and try for spark again. If nothing, then check the gap between the flywheel magnets and the module poles with a thin business card--insert the card into the gap ...

...ignition module using a thin business card for a gap gauge. Turn the flywheel magnets under the module poles, insert the card into the pole gaps, loosen the module screws to allow the module to ...

...ignition module gap to the flywheel magnets with a thin business card for a gauge. Remove the left side case to expose the flywheel and ignition module. Turn the flywheel to bring the magnets under ...

...ignition switch wire from the module and try for spark again. If nothing, replace the module. Use a thin business card for the pole gap gauge--place the card between the flywheel magnets and the ...

...gap between the ignition module and flywheel on a craftsman chainsaw? Are all saws the same? rebuilt carb, new ignition module, new plug,but no spark. is there a "gap" between the ignition ...