Homelite FactoryReconditioned ZR10522 46cc 20in Gas Chain Saw "chain saw stall give" Questions

...saw idles great, but when i give it gas it stalls out MAKE SURE WHEN YOU START A JOB YOU NEED TO PULL THE UPPER BAR TOWARDS YOU IN ORDER TO RELEASE THE CARB CHOKE SENSOR.WHEN YOU DO A COLD START THE ...

...chain saw will start and idle fine, however the chain will not spin and if you try to give it gas the engine will begin to smoke like its running hot and stall out Your chain may simply be too tight ...

...chain saw repair manual schematic of saw and how to repalce the clutch Its not hard! You need to purchase a tool that goes into your spark plug hole. You remove the spark plug, put this tool in the ...

...chain lock is engaged and almost wants to stall as the throttle is pulled. It just wants to idle...... What gives?? Can the chain be pulled by hand fairly easily? Check the fuel filter, air cleaner, ...

...saw if necessary but hold in throttle to full speed and do the same with high adjustment screw. turn it in till rpm starts to drop then back it out until you get to max rpm and it won't go any higher ...

i got a husqvarna 371xp it starts but when i give it throtle it backfires and stalls i replaced the spark plug didnt help Have you changed the ignition unit? Have you removed the starter cover and ...

...stall out when i give it gas. idles okay just dies when you give it gas. pull your muffler off and see if it revs up, if it does then your spark aresster screen or muffler is plugged, from carbon or ...

...chain loops around seems to be either in gear and stuck or seized somehow. If it is the brake then it doesn't appear to be disengaging properly. Any suggestions? With the cove off you should be able ...

...saw off. Remove the chain guide bar and see if the oil discharge slots are clogged with sawdust. Clean out the sawdust and restart the saw to check lubrication again. The Chain Skips or Jumps: If the ...

chainsaw dies out when gas is pressed to full throtle chainsaw runs fine until gas is pressed. When gas is pressed all the way, it dies instead of reving up to full throttle. Carb needs teardown and ...