WHEN I START IT,IT RUNS ONLY THE AMOUNT OF PRIMED ... When I start itit runs only the amount of primed gas I pump into itthen dies.thanks Check the fuel filter, air cleaner, and muffler for plugging. ...
...chainsaw. Runs few seconds then dies. Check the fuel filter, air filter, and muffler for plugging. Check the fuel lines for decay or other damage. Remove the carburetor and check the impulse passage ...
35 cc chain saw runs and than stops Fuel starvation - 'lean fuel' condition Basic things to check: 1) spark plug 2) spark arrestor in muffler 3) fuel lines and tank filter 4) turn adjustment needles ...
...chainsaw won't stay running. Changed spark plug and fresh gas. Please help if Fuel starvation - 'lean fuel' condition Basic things to check: 1) spark plug 2) spark arrestor in muffler 3) fuel lines ...
...chainsaw not pumping gas to carburator how to fix Check the fuel filter, air filter, and muffler for plugging. Check the fuel lines for decay or other damage. Remove the carburetor, clean it inside ...
starts fine and runs great but only for about 10 seconds then it runs out of fuel, choke it again and it will do the same, its like it fills the bowl with fuel until it runs out then must wait until ...
starts runs 10 sec. then dies Check the fuel filter, air filter, and muffler for plugging. Check the fuel lines for decay or other damage. Make sure the carburetor fasteners are tight. If still no ...
...impulse line, adjusted and rebuilt carb, new coil, checked case for air leak, saw is tight. Changed fuel filter, have fuel to carb. What am I missing. check with a husq.dealer,they had some crummy ...
poulan pro 42cc starts when choked,take off choke runs almost 1 minute and dies.chock and restart same thing. will not stay running even when throttled. Check the fuel filter, air cleaner, and muffler
5 questions posted
Usually answered in minutes!
1,998 Questions
1,006 Questions
710 Questions
725 Questions
285 Questions