Husky Husqvarna Chain Saw 240E w 16in bar "bar oil gas tank" Questions

Ad

...bar oil. Is there an easy way to remove the oil from the carburetor and get it started? Hello. It's doubtful the bar oil has made it to the inside of the carburetor. Dump as much as possible out of ...

Ad

Question about Homelite Garden

1 Answer

...that what you are seeing is the oil tank for the bar oil. You need to use bar and chain oil for this tank as it is what keeps the chain lubricated. Do not use two cycle oil for the tank marked

Ad

Question about Ryobi Garden

1 Answer

Does it take regular gas, or gas and oil mix? 50 to 1 ? 50:1 mix in the gas tank and bar oil in the oil tank. Fill your oil when you fill the gas. Keep the chain sharp.

Question about Garden

1 Answer

bar oil in the gas side and gas in the oil side. Its an M S 170 on your stihl ms170 your bar and chain oil goes on the left side nearest to the bar and gas-oil mixture in the right side nearest to the

Question about Desa International Garden

1 Answer

...put in the rest of the gas. It needs to be well mixed. (Do NOT use just motor oil) Run a good bar oil, like Stihl bar oil in the oiler tank. Costs a tad more, but clings to the bar better than

...through only a quarter (or less) of an oil tank to a tank of gas.I have cleaned the bar groove and made sure there is nothing obstructing the oil flow to the bar. oil pump failure, common on ...

...Bar grade oil, it is sticky and stays on the chain, it will properly lube the bar and chain with a full tank o gas. People have used, used motor oil but this wears down the chain and gears from the ...

...bar&chain oil to 1 tank of gas is there a adjustment for setting? Take the bar and chain off and clean both thourghly. Use a small blade screwdriver to scrape built up saw dust,dirt woodchips or ...

Question about Husqvarna Garden

2 Answers

...bar oil. When the saw runs oil is flowing but where the rubber corner piece which allows the oil to flow out of appears to be just dripping the oil straight out. It looks like it should fill a small ...

Question about Husqvarna Garden

3 Answers

...bar emptied the oil tank and cleaned the tank with a solvent. I started the saw and the solvent came outthe oil hole. I have the oiler adjusting screw on position 3 no oil on the chainbut there is a ...

Not finding what you are looking for?
Husky Husqvarna Chain Saw 240E w 16in bar Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Husky Garden Experts

littlewheel

Level 2 Expert

122 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you a Husky Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...