McCulloch 16 Inch Gas Chain Saw MCC1635AK "put" Questions

I have a Dynatec PSG 45 the instructions are not clear as to what hole to put the paint container into....there are 2 ???? I have one of these you put it in the longer hole. The hole in the middle is ...

...if u lay saw on its side and there are two caps one front for oil and one in back for gas, do u put chain oil in front one and mix gas and two cycle oil together and put it in the back at a 50 to ...

I removed a bedroom door and when I put it back the door won't close When you put the door back on was the door closed?  If not that is what you need to do to put it back in line.

I mistakenly put 64oz of gas-oil mix in my fuel take....help really... you put what where ??? you didn't make any sense at all if you mean you put this in your car then drive on it wont hurt it

Husqvarna 46 inch cut put a carburetor kit in because it was running rough cleaned the carburetor out put the kit in now will only start if I put gas in the carburetor What model is your saw.? What's ...

rope. I assume you can get it assembled, but you aren't getting the right recoil action. Before you put the end of the rope through the hole to put a handle on it, you need to preload the spring a bit

should I take the cover off and clearing it out Take the cover off, Take the bar off. Clean it out. Put the chain around the sprocket. Put the bar on. Put the chain around the bar. Tighten the chain a

LNT 2 Chain came off - how to put it back on? chain came off. how to put it back on ? http://www.ehow.com/way_5972042_easy-put-chain-remington-chainsaw.html Click on link to see how it's 

homelite LR5000Tgenerator will not produce power ,motor runs,breaker seems ok, it put out power for ashort time generator will not put out power motor runs breakers are ok it put out power for a short