...have to disconnect the power and and unplug everything and put it back and power back on the tv.. what do you think the problem is? Thanks, Tara have you got the auto power off enabled for 30 ...
Question about Sharp Office Equipment & Supplies
put itself back in standby mode with a red lamp light again... trying to turn the projector back on will not work unless the power is turned off from the mains and then back on again! please help!! if
...put it back when picture is clear? is this a CRT projector or other? If its a CRT you seem to have a power supply failure hat gets worse when it warms up. no amount of resetting would help that. If ...
Question about InFocus Office Equipment & Supplies
...getting a picture although dim due to the lamp needing to be replaced. Now even the old lamp is not giving any projected picture and the light is blinking once red. Any help would be appreciated. Ps ...
Question about Sanyo Office Equipment & Supplies
...getting dimmer and dimmer. I assumed the bulb was bad. Replaced the bulb and I still get no light from the bulb. The fan runs and the machine seems to power up fine just no light. Could I have gotten ...
...put it on the celling but picture is upside down what do i do Hi, I am not familiar with that model, But usually if you go into the settings menu you will see settings for the display which may be ...
Question about Sanyo Office Equipment & Supplies
...power circut if the projector gets too hot,and thus doesnt allow any current) Here is the full repair/service schematic for the projector. It should help you locate the sensor. Good luck ...
Question about InFocus Office Equipment & Supplies
...power on at all, it could be one of two things. Due to the extreme temperature of the lamp that causes the temperature of the projector to rise, every InFocus 4805 projector has a cooling system. ...
...power up. The little "on" led is not even on. I had exactly the same problem with the same projector. I took the whole thing apart last night, including all PCB boards the lot. After a lot of ...
...power, and you don't force any removal; you don't need a manual. Get several cups, I use Dixie cups, and along each step store the screws and misc parts in different cups. As you remove each part or ...
56 questions posted
Usually answered in minutes!
54 Questions
29 Questions
26 Questions
22 Questions
18 Questions