...use time of the air filter. Pressing the RESET button on the remote control for about 3 seconds displays a dialog. To reset the filter time, select the RESET using the UP arrow button RESET and ...
...the dilio!? thats not a bad thing, just clean air filter. if you have done it, then go to air filter on the menu, then keep reset pressed down - then it should be not blinking. sorry for bad
...reset on the projector itself. How can I clear the air filter message when I start up the projector? How can I reset a lamp timer after replacing a new lamp in a hitachi cp-s335 multimedia projector, ...
reset on the projector itself. How can I clear the air filter message when I start up the projector? Hiya there, just worked out how to reset the filter timer so for those that need to know here's the
Question about Sanyo Office Equipment & Supplies
...is steady and power light turns steady red... manual says send to dealer for repair but I'm trying to avoid resorting to that - any suggestions? Try cleaning the air vent filter and reset the
Question about Hitachi Office Equipment & Supplies
...air filter and i go to menu-options-filter time to make the reset but nothing happen. I puss the middle button in the remote control(enter),also tried the reset button but nothing... -There are also ...
...air dusting can to clean it out. Afterwards, reset the time in the menu. In the manual, it says you have to go in the menu to the OPTION submenu. Go down to FILTER TIME and hold the right arrow down ...
...air, or you can leave it in place and use a vacuum cleaner hose to suction off the dust. Some projectors have a sensor that gets reset when the filter is removed. A lot don't. Check the onscreen menu ...
...start it back up. try cleaning the air filter system and reset the filter timer Before changing lamp use a canister of compressed air to remove dust specially inside the projector when lamp is
Question about Sharp Office Equipment & Supplies
...for a while then it shuts down. Is there a reset button or something? Check your air filter, maybe it's all dusty and makes poor air cooling, and you need to reset time (hour) counter in projector ...
65 questions posted
Usually answered in minutes!
43 Questions
29 Questions
26 Questions
22 Questions
18 Questions