Hitachi CP-S235 Multimedia Projector "3 red lights" Questions

...455wi but its still blinking red Is it just one light blinking red or all 3 blinking red? Be sure to 'reset' the bulb hours. Try another bulb. If it is all 3 lights blinking red then you are

...3. computer input witch one light is flashing RED or illuminated RED with POWER BUTTON orange light. If LAMP INDICATOR light is illuminated RED than lamp runtime has reached 1800 hours. but projector ...

...replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then beeps about 3 times then turns to a flashing red. Help you need to reset the lamp ...

around 5 mins then shuts off lamp light and power light are solid red flip. After turning off and back on I get same results runs for short period then off lamp only has 3 hours on it. reset the timer

powers up, the fan runs for a few seconds, then stops, this is repeated 3-4 times then the unit stops with the power light red and the temp light red (blinking) one or more of the fans are not working

...red 3 times, a pause on the red, then 3 more times, then a pause on red etc etc. Before changing lamp use a canister of compressed air to remove dust specially inside the projector when lamp is away. ...

...3 red lights flashing 3 red flashing is a lamp error, not the fans. the lamp has a problem striking. make sure it's pushed in and plugged in all the way. if the lamp is not that old, the power supply ...

...red, the indicator of the bulb is off and the fan after 3 o 5 minutes PowerLite 7800p Multimedia Projector - Epson www.epson.com/cgi-bin/Store/support/supDetail.jsp?...oid... EpsonPowerLite 7800p ...

...3 blinking red lights. Project started with 3 blinking red lights. Replaced bulb, reset to factory settings, but bulb lens cracked, so sent that one back and got another. Replaced it, ran for 2-3 ...

...red? If all 3 lights are flashing red you are out of luck. If it is under warranty call Epson. If your warranty has recently expired I would still call Epson. This is a "known issue" for this model ...