my partner 700 cut off saw's carburetor keeps loading up with gas. you may have a hole in the fuel pump diaphragm,in the carb. Which will let gas into the crankcase through the pulse line
What is the guel mixture for the Partner K1250 Cutoff saw? 50:1
oil ratio partner k750 40ml to 1 litre of fuel 150ml to to 1 gallon
partner k1250 cut off saw and there is no spark going to the spark plug. The switch is on, and I put a new spark plug in. Do you think it might be the coil. Rich first make sure the switch is good and
...partner 750 cut off saw open the 4 bolts. if old one is off, keep turning around the white inside bit against the spring until tight. you will see a hole on the white bit. Aline the hole on the white ...
...and gets good spark motor has compression motor fires and stops runinng riteaway its a husqvarna partner k1250 Are you sure you pump in the unit properly? Some carbs have the gasket against the ...
I picked up a Partner 1200 gas prowered cut off saw.5400 Rpm. Model 2360025 I have no idea what the fuel mixture is! Thank You. 25-1 is standard a littel rich but is good for all
How much oil do I put back in my Husqverna K960 chop saw when changing oil? What mixture is used? 50:1 fuel mixture. a 2.6 oz. bottle of oil per 1 gal of fuel
...Partner Husqvana K750 cut off saw '' Go to smalleng.com they have video on how to do what you need. Check it out awesome website! On rope side of saw, remove 4 torx head screws and lift cover, ...
carburator removal partner k 750 Remove the covers and the air filter, the screw heads are Torq 27, with the covers removed, insert a Torq 27 tool through the small hole in the black air filter ...
2 questions posted
Usually answered in minutes!
26 Questions
3 Questions