Stihl Concrete Cutoff Saw Flywheel Magneto Ts 400 "ts 400 cut" Questions

I have a TS 400 cut off saw. won't start. Can not get a spark. Changed the plug and nothing. Tried everything I know, except for changing the magneto. Any solutions try cleaning flywheel and check ...

parts ignition coil wire stihl ts 400 http://www.mediafire.com/download/dg8eh2wsgyovxpl

stihl ts 400 What's your question?

to mix gas with 2 cicle for my ts 400 The bottle of the mix comes in many sizes. It should say right on the bottle of mix how many gallons of fuel need to be mixed with it. It will say MAKES X GALLONS

...ts 400 disc cutter i pulled the string over and over and nothing .it has oil petrol n everything what can it be? Try cleaning the plug and spray some starting fluid in the carb.Hope this helps and ...

...ts 400 wont pull with the spark plug in buy will pull with it out,the muffler is off,air beather is off,but the compression test out to be around 60,then it wont pull any more ? the bearing on the ...

What is proper spark plug gap for Stihl TS 400 Saw? BOSCH WSR6F Part number 1110 400 7005 or NGK BPMR7A 4626 Part number 0000 400 7000

...ts 400 has stopped working and sounds rough when pulling the cord Sounds bad, the only answer here is to pull the cylinder off and check the condition of the internals, if there is a lot of dust ...

TS-400 Quikcut that I rebuilt the carb because it was getting too much gas, now it will idle but when I cut the choke off it won't rev up but still idles. One man told me if the compression is

...ts 400 blade runs at idle.I have tried adjusting the idle down as far as I can but it still turns.  seems that ur clutch is sticking.take recoil caseing of and check by turning blade by hand,if ...