Have a bent push rod.I replaced it but can't adjust the clearance because the travel of the push rod is more than the valve will allow. I think you have posted in the wrong area!
...hydraulic system I have a northern hydraulics log slplitter 20 ton gas engine. I need to flush and replace the hydraulic system. I have a basic know how I worked on jets hydraulics and pneumatics ...
...Clean the float road with steel wool. Inspect the float ball. If it contains water, you need to replace it. Unscrew the float ball from the end of the float rod and screw on a replacement float ...
...these symptoms this past year. Any fix possible? Perhaps just a cleaning of the lever arm assembly? Replace the switch, although electrically it works? I would first start off by removing the float ...
Question about Flotec Plumbing
Why in replacing a pump in an existing shallow well it will only pump to 15 lbs. I have re-primed and get the same results. What do I do next? The jet may be plugged, it's no bigger than a pencil, ...
...grab it and shake it like a paint can and it may start working again but even if it does I would replace it. If it is a rod type you can try pulling up on the switch arm but it probably needs ...
101 questions posted
Usually answered in minutes!
1 Questions
1 Questions
0 Questions
1 Questions
