Stanley Bostitch N62fn Finish Nailer Parts Repair Kit N62rk "trigger assembly" Questions

...trigger assembly for about $35. But if you remove the assemble and replace the split-ring this would only cost a couple of bucks at most. Trigger assembly shown below. ereplacementparts.com is one ...

trigger assembly. I removed two pins, one at the trigger hinge and one lower pin for what appears to be for the valve assembly, but the valve assembly won't move. Help please. See the link below for a

...trigger assembly because the problem is with one o ring commonly referred as the purple o ring in the kits? either way the procedure to remove the trigger is first knock out the roll pin for the ...

...trigger valve assembly, and the unit now holds air pressure, but the trigger will not activate the plunger. I can manually trip the plunger with the tip of a screwdriver, and the nailer activates. Is ...

...behind trigger.will sink nail air coming out behind trigger.will not sink nail there is a split o ring on the trigger assembly that needs replaced or the whole trigger valve assembly needs

...trigger assembly. How can it be gripped in order to extract it? listen carefully, remove the roll pins that hold the trigger and also the trigger assembly, get a glove or shop rag and place in the ...

...or seat at the top edge of the spring cylinder? Cannot find a schematic or the trigger assembly. Seems like they just want you to buy a new trigger valve assembly. I think it could be fixed.

...trigger assembly itself. Check the link below for a pointer to a parts site that also has exploded diagrams of the gun. These diagrams will assist in parts replacement. The trigger assembly should be ...

...trigger assembly. Most likely the orings or seals in the headvalve are not making perfect seal. Remove the head and pull out the headvalve. Apply plenty of white grease to orings and test again. If ...