...flash" the field to restore operation. Search Google for instructions. Sometimes others have found that plugging in an electric drill that does NOT have a throtling trigger and spinning it while ...
...how long has the welder ben sitting not used? if it has been sitting a wile you may have to flash the fields if this dosent do it check the
Flash" the exciter. If the first attempt does not work, reverse the polarity of the 9 volt battery. It only takes a few seconds. This creates the initial magnetic field that makes it
Question about Miller Welding Tools
...only see tiny flickers of spark Switch S1 may be dirty or damaged. The field should not need flashing as that will occur when you engage the start button.It is possible there are some faulty ...
...rectifiers SR2 and SR3 to make sure they are not burned out or shorted.While it should not need flashing, if everything else checks okay, open the end cover and locate the 2 larger brushes- ...
...flash the armature with a 9 volt battery placed on the 2 larger contact rings, Usually the minus of the battery should go to the outside. and just hold contact for a couple seconds. This ...
23 questions posted
Usually answered in minutes!
111 Questions
70 Questions
52 Questions
49 Questions