Question about Panasonic Office Equipment & Supplies
...lamp time in Panasonic projector model vex 500 Press the Power button so that a picture is projected onto the screen Press the Menu button to display the "Main Menu", and then press the F or G button ...
Question about Hitachi Office Equipment & Supplies
...Model: CP-X1200 ( Lamp) Part#: DT00591 Lamp Type: UHB Wattage: 275 Watts Lamp Hours: 2000 Hours Model: CP-X1250 ( Lamp) Part#: DT00601 Lamp Type: UHB Wattage: 310 Watts Lamp Hours: 2000 Hours I'm not ...
Question about NEC Office Equipment & Supplies
...model VT595 and VT470. The lamp will still not work - the power and status light just continue to blink with no illumination I had the same issue, what I figured out was that I never removed the lamp ...
...Model # PLC-XP57L and it says to change the Lamp. I have put two different lamps in it and it doesn't Light and the replace lamp light comes on. I do ger 32 VAC and up to 85 VAC until the lamp fail ...
...to be pressed ! What make and model do you have ? if the lamp warning light is lit steadily, the lamp is at fault. if the lamp warning light is flashing, the ballast (lamp power module) is at ...
Question about Sony Office Equipment & Supplies
...model the lamp assembly contained the relay so replacing the lamp assy corrected the problem. Is this solution likely to work with my model? I had the Problem, I replaced the bulb and it fixed the ...
...lamp counter in Above emntioned model Dear Sir, You can reset the lamp as under: 1. connect the Power cord.2. Press (down), +, enter, simultaneously and press Power.3. Lamp 0000H will be Dispalyed. ...
Question about Sharp Office Equipment & Supplies
...lamp indicator light remains illuminated and the device will not turn on. Model XV-Z2000 You don't mention whether the power light is on as well. IF you are seeing red lights for both power and ...
Question about Mitsubishi Office Equipment & Supplies
...model turned off their lamp after 2 min of power on Possible that the cooling fan is not operating , the filter is clogged or there is fault on the power section/motherboard and so it trips ...
...or stays lit - lamp probably faulty How old is the Projector/lamp (average lamp life is around 2000-3000 hours) where can i get circuit diagram for dlp projectore optoma make model ep
5 questions posted
Usually answered in minutes!
25 Questions
11 Questions
12 Questions
9 Questions
11 Questions