Question about Optoma Office Equipment & Supplies
...power cord. Use a screwdriver to remove the screw from the cover. Push up and remove the cover. Remove the 2 screws from the lamp module. Pull out the lamp module. Replace the lamp module in reverse ...
...power cord. Use the screwdriver to remove the screw from the cover. (1) Push up and remove the cover. (2) Remove the 2 screws from the lamp module. (3) Pull out the lamp module. (4) To Replace the ...
Question about Christie Office Equipment & Supplies
i need Modules LVPS (Low Voltage Power Supply) i need Modules LVPS (Low Voltage Power Supply) Panel driver with price ?? you're going to have to go through christie to get that. they don't sell parts ...
power supply for this projector. Do I have to write off an expensive projector that is only 5 years old or can anyone porvide alternative spares? FOr most service centers, the only available parts are
...power button and the light turns solid green but the lamp does not turn on and the fan and color wheel does not turn on. Please help. I just bought the projector second hand and a brand new lamo. ...
...the power cord. 4. Use a screwdriver to remove the screws from the cover. 5. Push up and remove the cover. 6. Remove the 2 screws from the lamp module. 7. Pull out the lamp module. PLEASE RATE
...not to touch the bulb. What can I do? your prblem will be in motherboard or in power pack module-start to change powerpack module first then motherboard second- or pass it to good sevice
module in optoma projector dlp in ds309 2 red light flash be sure to reset the lamp hrs, always a good idea to reflash with current flashware because your firmware can get corrupt over time. next step
...module, and can determine things such as ignition status, lamp power, operating condition, and of course the presence of the lamp. If the module is found missing or otherwise "fatal", it will turn on ...
15 questions posted
Usually answered in minutes!
25 Questions
11 Questions
9 Questions
11 Questions