Shimano XTR FDM970 Front Derailleur "bike chain" Questions

...chain. if the bike has gears it does not have a master link, that is for single speed bikes only. You will need an 8spd chain for your bike (1/2" x 3/32), these will fit any 6,7 or 8 spd bike. This ...

...bike the chain is broken Replace the chain If the existing chain is worn-out so too will the gears be. Use a chain-checker or ruler to measure 'stretch'. If the chain is over 0.75% stretched you will ...

...chain on our bike because the bolt is not seeming to want to (SCREW OFF)so i dont know what to do with my bike! It is a 26in. bike (HUFFY GIRL BIKE) FYI THANK YOU, Sincerly jenna Your question is not ...

bike chain broken, how to fix this? Sometimes all it takes is a master link or "quick link," but you can't count on that. How to fix it depends on several factors. There are different chains for the ...

...chain on a 21 speed bike. To remove the chain you need to use a chain tool that presses one of the pins out of the one of the chain links (any link, there is no master link). To put the new chain on ...

...bike without breaking the chain using a special chain break tool or if the chain has a special link called a quick link that snaps apart. However, to clean a chain it does not need to be removed from ...

...bike and look straight along the top of the chain. As you can see the line of the chain is a mild zig-zag where it is parallel to the bike at each gear but needs to angle across the drivetrain in ...

...chain does this bike have? If it was me, I'd measure the chain already on this bike or go to Walmart with a tape measure and measure one there. I assume you don't have any of the paper work that came ...

...bike and need a chain diagram . My chain broke and I lost the manual. Thank you, Mike Chain installation like almost anything else on that bike is a generic procedure. Google for videos or look at ...

...bike with a 48cc motor on it. The chain hits my fenders and now keeps popping off I have the wider white wall tires on my bike with fenders, I had a 48cc motor installed on it. after a few runs down ...