...no were how to fix falcon 7lo sprocket on mongoose rim old bike mongoose Villon The freewheel has a ratchet pawl (an internal, spring loaded lever) that would normally engage gear teeth in one ...
Yukon Terrain. Rear wheel gear ratchet slips. Have taken out rear gears and found large clip holding ratchets in place is distauted so does not flick into position when attempting to cycle thus making
ratchet "pawls" (or catches) has stuck "open", and is unable to "catch" on the rotating part that spools (or pulls) the shift cable that is connected to the derailleur. This is why the lever has very
parts needed to put it on. The List: --Both left and right crankarms (right side has the gears) --Axle installed into the frame (no? take it to a bike shop... specialty tooling is required to put them
...parts, or can order them and they can make sure they are compatible with the rest of the drive train (not all shifters are created equal) side note: sometimes old shifters are not actually broken and ...
...a chain break when you're really honking on the pedals? It ain't pretty. That said, it could be the ratcheting mechanism is gunked up with old grease--try squirting some WD40 or other light lube into ...
...ratchet and the crank together like pliers to give you more leverage. 3. Take the puller and screw it's socket inside the threaded hole of the crank. Hold the crank and turn the puller handle ...
...how to change the rear tire. 1. You'll need to grab a 15mm wrench or socket & ratchet combo. Remember, righty tighty lefty loosey. 2. Remove the rear derailleur gear guard, ...
18 questions posted
Usually answered in minutes!
2 Questions
