Front Load wcvh6260 GE front load washer. Motor will not run. Found that no voltage was going to the motor or inverter from board. I replaced the board. Everything started to run fine including motor.
treadmill stuck on highest incline....and motor running...but seems stuck...won't come down If the incline is stuck, it could be a problem as simple as the gearbox on the motor being jammed. Unplug ...
...Motor Control Board replace the board. When was the last time lubricated the running deck? Answer: Never ! Then I suggest you purchase lubricant and apply it on the deck about 75% to 85% of the ...
Question about Exercise & Fitness
...it. Model NTL2495.0 first of all check the drive belt is loose or not. Drive beit connect with the motor and roller of the treadmill. its not possible to see the drive belt out side. you can only
What's your problem?motor 2.0 h.p.p. What's your problem?motor 2.0 h.p.p. try fo measure the input voltage motor, if there are voltage, the motor need repair, can be the windings, bearing,
UNIT NOT UP TO SPEED, LUBED TREADLES, THEN AFTER 5 MINUTES, SPEED OK, THEN BURNING SMELL. REPLACED MOTOR, SPEED SENSOR 2 YRS AGO. WHAT COULD IT BE? Steps you should to to find the exact problem. first
I have a Proform 585 and the incline won't go up or down. When I push the button you can here the motor trying but nothing happens. Please help As you are hearing the motor sound, It could be a ...
Question about Exercise & Fitness
...problems:1) Very high belt/deck friction.2) Short in the motor.3) Short in the wiring or electronics.4) Literally cooking the lacquer or cardboard core (on cheap machines) in the motor from belt ...
Problem with the lifespan 1200i The motor on the lifespan doesnt sound like it is running evenly and the motor stp over 2.2 MPH with code E1. What is the problem? 1( adjust the speed sensor, clean, ...
c2200 treadmill motor problem Motor problem 1)measure the voltage input motor, if there are The motor need repair or replace.2) mEASURE the output voltage board, for input voltage motor, if there are ...
2 questions posted
Usually answered in minutes!