Onkyo HT-S660 System "receiver shut down" Questions

...receiver is shutting down after 10 minutes of running it shuts down and says check speaker wires, but i have numerous times and possitive is to positive and negative to negative Did receiver work ...

...down the receiver We have hooked up the htz510 system and when we turn the receiver on, the turn table (on the changer) makes noise & then it says "welcome to the samsung......" then goes into ...

...shut down if for example you encounter the pop on the 4th speaker, try changing the speaker wires. 5. If the receiver still shuts down then it would be a short on the speaker itself and it would need ...

...receiver that powers up and the shuts down. I've replaced the power cord (due to rabbit) and the fuse. But continues to shut down?? Why did you replace the fuse - did it burn out or opened? It's ...

...music then it could be the speaker's fuse blown up, or the speaker's circuit breaker shut down. If nothing sound then possibly the strong static has burned down the audio/receiver's circuitry

...Receiver shuts down when volume set higher. my yahoo a/c is open what mail not open $ internet explo is hang my receiver is powering up and turning off in one second with out acknowledgeing the tv, ...

...receiver shutting down. As I increase the volume beyond a certain point the Overload message is displayed and the receiver then shuts off. Its a Pioneer VSX 517 Home Theater Receiver. I am not using ...

...receiver shut off, or did it remain powered up? If the unit overheats, it will shut down. They can also shut down if the volume is maxed out. Most times when this occurs you can power down and wait 5 ...

receiver still shuts down when this speaker is connected and the receiver is turned on, swap a working speaker onto these wires, leaving the suspect speaker disconnected and making sure the other bare

...receiver doesn't shut down, power off the receiver and add another pair of speakers. Power up the unit again and turn up the volume. If it doesn't shut down, power off the unit again. Now connect all ...