Onkyo TX-910 Receiver "video change turn signal switch" Questions

...and 480p signals from the DirecTV receiver, and also turn off its native output. The DirecTV receiver then upconverts SD signals to HD. Changing RX-V373 volume then doesn't affect monitor video

...change if you manipulate any knobs or switches. Turn it off and operate every control throughout its range to wear through oxides that may have built up through non-use. The signal has to travel ...

...video back for tv? I suppose pcm light means that the pcm mode is turned on (pcm meaning pulse code modulation), in other words, the unit was switched to digital signal, so if the digital rca or ...

video, but is only 1.1 for audio. When you turn on the TV, a conflict develops between the 1.1 audio and the TV's 1.3. There are two fixes I am aware of: 1) You can connect the HDMI directly from your

...Turn the volume control to something medium. The errant switch, control or condition may change and you will suddenly release the amp's full power and possibly destroying your speakers. If a ...

...turn off the TV I lose it again. The problem is the TV, I connected the receiver to another TV and it worked fine with video and sound. I sometimes get an error message from the TV " HDMI switching ...

...Turn the volume control to something medium. The errant switch, control or condition may change and you will suddenly release the amp's full power and possibly destroying your speakers. If a signal ...

...then switch to analog if the digital signal is not present or drops; and return to digital if the signal reappears. Page 11 talks about the default and manual assignments of digital inputs. They ...

...turn it way up to hear and if I change it back it is extremely loud, this happens when I switch from HD on TV to regular channels, it is not my cable box, must have something to do with reciever ...

...change to adjust the correct frequency. Others have a learning code set by the manufacturer and are usually in the operation manual. If you want to test whether the remote is transmitting the signal ...