Question about Sony Audio Players & Recorders
analog input with another receiver ,if it comes out same low , good quality sound level ,then issue/problem is on input source not on receiver. Sometimes the way source audio was recorded causes these
Question about Denon Audio Players & Recorders
...analog input jacks for the selected input source are detected and the program in the AVR-3300?s surround decoder is selected automatically upon playback. This mode can be selected for all input ...
...Analog" changes to "coax/opt" or When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 38), this unit automatically turns off the digital sound field ...
...analog RCA cabling from the source to any available Line Level input but be mindful that multichannel info is only carried digitally. If theTV does have an RCA analog audio input you could also run ...
...analog source material. Activation of a tape loop on a modern AVR disables all digital sources. But you will still be able to apply DSP to the sound coming through the EQ as you would with any other ...
...source I can see is the tuner. The Denon is converting the digital sound from the cable box to analog to feed the speakers, but does it not output an analog "line out" as well? It only passes the ...
Question about Kenwood Audio Players & Recorders
...loop on a late-model Audio/Video Receiver will effectively tie the receiver down to stereo-only analog sound reproduction. I'll explain. The connections themselves are fairly simple but it pays
Question about Denon Audio Players & Recorders
...analog? If it does, which set of audio outputs could I use for this? Thanks for the help. H Lobdell On the Denon AVR-888 (and I presume others), you have to put the unit in "record" mode. This is ...
Question about Panasonic Audio Players & Recorders
...analog source will work with the EQ engaged. I'm guessing you have digital sources you want to process. Ain't gonna happen. See page 19 of the manual. Note at the bottom. Be advised that the ...
...source exiting the receiver to the EQ. Use it in the standard MD/CD-R slot. The following is some boilerplate I made up that should explain some usage limitations. Be advised that the engagement of ...
89 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions