Does it work after being turned down in volume? or is it completely dead with no signs of power? or does it show some indicator light but no sound? Check for blown fuse and then for blown speaker coil
...blown" but there is no visible sign of damage. When I push it in slightly (while off), I notice some distortion where as with the other speaker there is no noise (as it should be). It's almost as if ...
...blown output transistor or chip, which generally show no external signs of damage. This would take an experienced technician to find and fix, and I commend you for knowing to check the speakers, ...
...blown. I purchased the required fuse, installed it and attempted to plug on the subwoofer, when the fuse blew again. This leaving me to believe that there is a short in the circuit somewhere. However ...
Question about Mackie Audio Players & Recorders
...speaker distortion or hum. I understand this amp has multiple internal fuses- could I have blown one and only be amplifying on half of the amp? I have green on power LED, the signal LED will flicker ...
...signs of wear. It would crackle and make this popping like noise at any volume really, but got worse as the volume increased and as the crossover was set higher. 150Hz cut sounded way worse then the ...
Question about Sony Audio Players & Recorders
My Sony Active Subwoofer( SA-WMSP87)for unknown reasons has quit! I noticed the other day that the led wasn't lit up, so I removed the back and found that the 125V-3.15 Amp fuse was blown.I replaced ...
6 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions