Switch LH, A few 6-12014 FasTrack 10" Straight Tracks, 1 (6-12020) FasTrack Uncoupling Track, 1 (6 -12029) FasTrack Accessory Activator Pack, 2 terminal tracks, 2 isolated tracks (brakes the same
...about 1.5" of track discontinuity. It also eliminates wheel sparking that pits the surface of the outter rail. Wish I had a better solution short of taking the switch apart and doing some
...and a diesel run right through this section. Any ideas. We are using gargraves flex track and switches. Thanks for any help Don Hemmer Check your track voltage with a multimeter. If you get a ...
...track) switch comes on but no power to the toggle switch then the toggle switch may be faulty....I had purchased 2 rh o36 & 2 lh 036 and one of my lh switches did that, so I sent it back for a ...
...track.try spraying a very small amount of CRC [brand ) 226 it is better than any contact cleaner on the market. do not get it on the rubber traction wheels on the engine. If you do, wash off ...
...power, of course. Open it up if you can and see if all the contacts are touching when you move the ...
...switch on the train itself? The train is not responding to the remote even though it has fresh batteries. Also any tips on how to keep the train from shutting off before it gets a head of steam would ...
...and bell sounds are goofy. and on some of my traditionaltenders the sounds are still on when the switch is off.. any answers to these quesitions? The CW-80 is not suited for electronic sound ...
...switch on the engine - it didn"t make any difference.) Do you think the problem is in the transformer or the engine? Turn the power to the track off and then back on. The engine may stay still ...
...switch to cab-1 and set which engine you want. if it does not move, but the rpm goes up and down with the dial, CHECK THE BRAKE! if none turn on, check the voltage in the transformer, grey box, and ...
6 questions posted
Usually answered in minutes!
33 Questions
31 Questions
10 Questions
7 Questions