Datamax DMX E4203 Printer "gap" Questions

...using a specific program with this printer. Check to see that the label sensor is over the gap in the label. It is just under the head on the right hand side. You might also have the unit ...

...drivers. You should be able to get these from the Datamax website. Also check the printer set up, gap sensor etc. Also check the media is loaded correctly. Hope this helps. Regards Stu

...of the left edge of the labels, or in the center of the labels. Typical media sensor setting is "Gap Mode". Another common issue is that the sensor might have a piece of label or something stuck

how do i adjust the print head gap on a tally genicon 2280+ printer The 2280+ does NOT have a head gap leaver you can adjust the gap from with the menu on the printer. The printer has an automatic gap

Keeps saying "Auto Gap" We leave our printer on all night long for nightly reports and lately every morning the alarm light will be on and "Auto Gap" will be on the screen? What does this mean and the

Gap not detected GAP NOT DETECTED error in displayProduct: T5000rSymptomGAP NOT DETECTED error in display.Possible CauseDirty media sensors, wrong label lengthRecommend SolutionClean the upper and ...

PRINT GAP WHEN SET ON AUTO IS TOO CLOSE. (RIBBON SMUDGES ON PAPER) WHAT DETERMINES THE STARTING POINT FOR THE GAP ENCODER? DOES THE PAPER SWITCH ON THE CARD GUIDE HAVE ANYTHING TO DO WITH IT? enter ...

...TallyGenicom T6312 printing blank pages This is most likely caused by a problem with the print gap mechanism. It seems the print gap sensor was not able to adjust the gap correctly for your

printek 4300 at power up, carriage initialises, gap motor turns, then displays"bad gap home" and does nothing else.unable to get into set up or anything else. Sounds like a bad gap switch. You can ...

Mp: bad gap home can't print will not do anything printer comes up with the MP: Bad Gap Home ?? Help Bad GAP HOME is a problem with the sensor (switch) that senses the automatically set printhead gap.