Singer Touch Sew 7462 Mechanical Sewing Machine "fix bobbin problems" Questions

fix it Take it to a Janome dealer for repair. Bobbin winder sensor needs repair or replacing I had my sewing machine repaired twice by Janome, but the problem remained. My bobbin winder would do a few

bobbin case and locks the machine up. How do I fix this problem? hello, I had the exact same problem and could not find the solution until i took my machine to my sewing sensei and i solved my tedious

...bobbin thread. NO FIX! Then, I changed the needle - the problem was fixed instantly. I sewed awhile and then put the original needle back in. No problem. I think perhaps that the problem is being ...

fix this problem! Your bobbin winder has seized. Remove the top cover and oil the area where the bobbin winder shaft goes through the bobbin winder assembly. You might need to force the winder to turn

...bobbin problems a piece broke off while i was embroidering in the bobbin area then the whole bobbin and case,came off from the bobbin door,bobbin door will not shut.. you may need to take it to a ...

fix most problems. But, if you are still having problems, look at the thread in the problem bobbin. It should be straight and tight. If it is kind of wobbly and a little loose, you'll need to wind the

...bobbin. Had it fix in late 2009 and it came back with this problem had it checked again and it was supposedly fixed. Tried to use it a few months later to discover that the problem is still there. ...

...bobbin thread. NO FIX! Then, I changed the needle - the problem was fixed instantly. I sewed awhile and then put the original needle back in. No problem. I think perhaps that the problem is being ...

...fix bobbin The bobbin keep jamming up with threads they have to be put in the machine in the proper direction . Make sure the bobbin is wound so the thread is smooth and even. (When winding a bobbin, ...

...bobbin case out of alignment so the needle breaks every time it goes down. Any way to fix it on my own? I had this problem and it is very easy to fix! With mine I looked at it for about half an hour, ...