Question about Brother Sewing Machines
...put the needle plate on before you install the bobbin case. You can lock the bobbin case down by putting the needle plate on after putting the bobbin case in. Take off the plate and remove the bobbin ...
...bobbin and put it in. It will only feed about 6" of thread before the bobbin thread breaks. It becomes so tight I can't get it to feed. Both bobbins will not feed. However I don't believe it's the ...
amy When you put the empty bobbin on the thing on the right, you may have to then push it further to the right to activate the spooling and inactivate the needle. Then step on the gas! Hope this helps
...PUT THE BOBBIN INTO. I ORDERED A BOBBIN HOLDER, BUT THAT IS NOT IT. The bobbin fits into a bobbin case (holder), the bobbin case is what you take out to put a new bobbin in. The bobbin case fits into ...
Question about Sewing Machines
...put it back the bobbin thread would not engage with the top Verify the bobbin has been installed and threaded correctly through the bobbin case. Confirm the bobbin is installed turning the correct ...
Question about Sewing Machines
...put the bobbin in it and try to sew. Use a new different bobbin...plastic bobbins are notorious for melting and then don't work. Also, take your time winding the bobbin...a nice even wind will center ...
...put the bobbin case with new bobbin back in. Now I cannot get the thread to catch so that I can begin to sew. This is a new machine and I have used it only a few times. have you tried changing the ...
Question about New Home Sewing Machines
...Put in a new needle and it still hits a Bobbin Case. Can you help I suspect the bobbin case isn't installed correctly. Or the needle.. More likely it is the rotary hook that is interfering. Leave the ...
Question about Brother Sewing Machines
...guides are used. Maybe also try using a new bobbin of thread. Ensure it's facing the right way when you put into the bobbin case and that you have pulled several inches of thread from the bobbin
Question about Sewing Machines
...bobbin winder to put a new belt on but bobbin winder fell to bits and I do not know how to put it back Together The bobbin winder fell to bits when I removed it to put a new belt on there are three ...
46 questions posted
Usually answered in minutes!
175 Questions
46 Questions
24 Questions
21 Questions
21 Questions