opposite of the other 1/2 moon part already in there. Next put the round part over it(race cover). It goes on with the to demples to the inside and the flat part up. Then flit the tabs on the left and
Question about Sewing Machines
moon and back at least once), AND the same problem. It stopped working once right after I had opened one of the doors to adjust something, so I assumed it had something to do with the door. There is a
...opposite side of the last thread guide. Also make sure the machine is threaded correctly. the needle is in correctly with the flat side to the rear of the machine, make sure to thread the upper and ...
...opposite the half moon shaped shuttle..... the ring holding the hook has a small pin that locates it in the main surrounding housing like a keystone. There are two lugs to hold everything in place If ...
...moon thing with a sharp point on it) in the machine by placing it opposite the little curved bar. Make sure it is seated properly on the ridge. The you take the race, the circular part with a small ...
90 questions posted
Usually answered in minutes!
435 Questions
168 Questions
165 Questions
144 Questions