Brother LX3125 Sewing Machine "model lx" Questions

...model so my question would go through. it is a brother LX-1120. my email is [email protected] Thanks, George The timing is set on the lower shaft on the left end. Needle bar rise is 2.5mm. Check ...

...help you get the most out of your seger. Hope this helps!

...Lx-3125 sewing machine from my sister in law and unfortunatly there wasn't a user's manual. I need to know if anyone would know how I would get one for free or even where to look to ...

I need a manual for Brothers XE 5840-001 Model LX 3125 Prod. Code 885-407 Go to www.brother-usa.com and under support for home sewing and embroidery, you will be able to download a free manual.

...Brother sewing machine I have. But the Brother site says that model number doesn't exist. My machine does NOT match the photo given for the LX-2500. Any ideas?? It's hard to give an idea about it. ...

I lost my Janome sewing machine manual. My model number is Model 344 L.X. I am wondering if I could download the manual from the internet? Any assistance would be appreciated. Regards. You will need ...

...model No.lx 3125. the thread cut at needle hole and running hard , how to solve this problem Your machine is probably out of adjustment. You can probably take it in for service, however, the repair ...

...lx baby lock serger model ble1lx . the problem I have is broken thread inside the hole for lower looper. How do I get it out. I have tried running a wire thru the port down and from the needle hole ...

...LX on the model number...is there just a BLE 1? Also, can't lock the cutting knife. The dial turns and clicks w/o holding the knife from moving up and down. Thank you. apparently so, I have one from ...

...reach the bobbin to retrieve thread up to start sewing Sewing machine needles are specific to each model. If the needles are not for your model they could be too short or too thick so that they