wind thread around. The fly wheel spins though...I've been putting thread on the bobbins by hand. If the fly wheel is going around then the clutch isn't disengaged to wind the bobbin, you need
...winding, use your right hand to wind the free end of the thread clockwise around the bobbin five or six times. 10. Pull the thread to the right and pass it through the slit in the bobbin winder
Question about Husqvarna Sewing Machines
...thread knife and step on the foot control to wind the bobbin. When the bobbin winding is finished, remove the bobbin from the spindle. Cut the thread to separate the bobbin thread from the needle ...
...thread wind smoothly onto the bobbin. If something is wrong with that tensioner or the thread is not following the correct thread path, it could cause the thread to not wind smoothly. It appears that ...
Question about Singer Sewing Machines
...a pencil tip just before it winds onto the bobbin. Some of my machines wind the thread unevenly (more on the bottom than the top of the bobbin) and I balance it out by lifting it when winding.
wind a bobbin, you will need to unthread the machine most of the way. Leave the the thread through first and second thread guides. Then bring the thread around the bobbin winding disc (so that it goes
...discs and pull the thread towards the back of the machine. Hold the thread end and turn the handwheel towards you to take up the bobbin thread. Close the bobbin cover and you're ready to start
Question about Husqvarna Sewing Machines
wind a bobbin on a Viking is to thread the machine through the needle and go under the foot then up to the bobbin winder (it has to be under the foot or it winds too tight. If it still winds too tight
...wind smoothly. re-thread sewing machine for bobbin winding. There should be a screw looking thing that holds the thread taut while threading logo52's answer was perfect. If you have not passed your ...
...I don't think any machine really winds well. What I do is hold the thread about an 1" away from the bobbin. start to wind and I guide the thread slowly up and down the bobbin so that it winds ...
87 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions