Question about Singer Sewing Machines
...remove the bobbin case to realign the case? The bobbin itself comes out, but the bobbin case is stuck in the machine and needs to be repositioned If your Singer model 600e's bobbin case is stuck, try ...
remove the bobbin case and/or replace the bobbin case. Jamming can cause the machine to be out of time. If you thead the machine with the presser foot up, have the bobbin inserted into the bobbin case
...bobbin in model 525fa if you have a snap in sewing table remove it first at the bottom in front of the needle plate area is a bobbin case door when you open it there is the bobbin case & also ...
...remove the shuttle hook and bobbin case by turning the 2 little black levers at the bottom right and left in the bobbin area, Once you do that, the circular piece that holds the bobbin mechanism in ...
...bobbin case or the race (where the thread catches)? Clean the bobbin case. 3) Make sure that you are using the correct bobbin for your machine and that it is installed correctly. 4) Check that the ...
Question about Sewing Machines
...remove the bobbin case with the bobbin in it...it's stuck and won't come out would help if we knew the make & model. If there is little tab on the front of the bobbin case, pull it out. That will ...
Question about Singer Sewing Machines
...lever on the front of the case. When that lever is in, you can't remove the bobbin. When you need to insert the case, you have to lift the lever, making sure that the protrusion in the case is on
...remove the needle plate and bobbin case. As this ring now rotates, you will a finger on the ring that will pass behind the needle from right to left and it should catch the thread from the eye of the ...
remove the bobbin case, there is probably some thread caught in back of the bobbin case or wrapped around the hook. You'll need to take tweezers and gently remove one end of any thread you find in
57 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions