Question about Singer Sewing Machines
thread winds under bobbin instead of on the bobbin. Make sure the bobbin is seated all the way on the winding pin. There may be an adjustment for it--a technician can probably fix it for you. However,
Question about Husqvarna Sewing Machines
...winding a bobbin with the top thread threaded through the needle. Place the bobbin on the spool spindle with the mark (a stylized H) outwards. Bring the bobbin spindle down. Next pull the thread from ...
thread is winding under the bobbin. if the bobbin thread is winding around the bobbin winder spindle thenthe bobbin is not sitting correctly on the bobbin winder spindle,, the bobbin (metal or plastic
Question about Husqvarna Sewing Machines
...thread can increase tension on the winding process also check that you use a spool cap as large as or slightly larger than your spool. If it still winds tight. I?ll explain what bad thread can do. ...
Question about Singer Sewing Machines
...thread keeps winding under the bobbin. What am I doing wrong? if the bobbin winder is driven of the end of the machine then you may have to guide the thread as it winds onto the bobbin if you are ...
...like you don't have any tension on the thread when winding the bobbin. Make sure that you are running the thread through the tension disc on the top of the machine before going to the bobbin
...winding and cut the thread tail. Then step on the presser foot and complete winding. When done, cut the thread to separate the bobbin from the top thread. Rethread the top thread and insert your ...
Question about Janome Sewing Machines
...when you wind the bobbin. So follow the directions for winding the bobbin, make sure the thread fits under the little revolving wheel, and make sure that the stitch part of the machine is
...winding to keep the thread flowing smoothly. But I always do the following anyway just to ensure a smooth bobbin. Take the thread from your spool, through the eyelet or tensioner, then back to the ...
...thread around the bobbin winding tension disc so that the thread is under the tension disc. The thread goes from left to right on the front of the disc. Bring the thread to the bobbin and put the ...
94 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions