Maytag MMV4203D 1100 Watts Microwave Oven "hole ceiling" Questions

...hole in your ceiling... if your microwave is completely ruined then don't bother with it just get a new one but if it works try moving it farther away from the ceiling.. good luck =]] Yes it can. ...

...oven.The oil leak drips from the a hole in the microwave oven ceiling. What should I do? That is called dirt. From not using a cover on your food. any hot oils will precipitate back on the

...with hidden piece of metal caught fire in my Sharp r1490 and burned with a big flame. Several small holes were burned in the ceiling panel. Are we in danger of radiation exposure/ is the oven still ...

Ceiling plate cover has small hole; otherwise works fine. Sharp Carousel II Over the Range Microwave R-1821 The ceiling has a 4x5 inch plate that has a small burn hole. Is this dangerous? Can I fix ...

...hole thru inlet cover attached to ceiling of microwave. Microwave still works fine warming food. No arcs. Chew cover inlet not available. Can I plug hole with mica or silicone? You may be able to get ...

...through a plastic cover, you simply pry the cover off to access the bulb. If it enters through holes drilled into a wall or the ceiling, you will need to remove the U-shaped cover panel to

ceiling in my 7 year old space saver is peeling...how can I fix it? You need to clean it, sand it shiny, then clean it squeaky again. If the cavity metal of the oven is cracked or split, you can use a

...I noticed there is a metal piece in the inner upper ceiling of the microwave by looking through the holes. This metal piece continuous to move up and down. I thought it is a vent and should stop once ...

the cover back about 1/2" and lift it away. Look for a standard appliance light bulb right over the holes in the oven cavity ceiling or wall where the light normally shines in

...what maybe the source of the waves?) has become dislodged and fallen off. There are three screw holes in the cover, but the screws are nowhere to be found. Can I replace with ordinary screws? Can ...