Fargo DTC520 Thermal Label Printer "change" Questions

... some colors are not printed like the color black & is happen at de back of de card too,... i had 2 change it 2 a darker blue You can either change the image darkness level on the printer or through ...

...be turned off in the printer settings. If you're sure that it does have an encoder, you can check/change the setting by going into the menu on the printer. Go to Menu -> Setup Printer -> Change ...

breaking since I change printhead My DTC525 printer is continuosly breaking the ribbon since I change the printhead Hi, i think you must to adjust tension of ribbon.Go to menu and find adjustmento for

...keep saying my print head is going bad...but after 3 months? we are cleaning it everytime we change the ribbon etc...so what could be the problem. note: my eltron ID printer lasted 3 years ...

white card keeping jamming in the middle everythine Hi gigi_airambu, The card jam, often caused by cards are jamming on or at the flipper table. Here are additional steps that you can apply to resolve

Iam getting an error message that tri color has occur problem . its 6983 printer i change the catridge of tri color but still orange light is blinking on tri color catridge.please advise me what would

Printer washes the image out. The problem was with Photoshop. After changing the print settings so that nothing was modifing the color settings it worked just fine.

Fargo DTC300, prints yellow and magenta, stops at cayn window displays ribbon miscue, changed to new ribbon and the problem is still the same, any ideas is a printer thermal head dirty on same ...

card hopper jamming always there is a jam on the card hopper Could be that your cleaning unit is not installed or is old. Or, it could be too few cards in the card hopper. You could apply a little ...

...system, but will only print test print if i press manual bottons on the printer. I tried to change the printer cable to another one, there is no action. Please advise me on what to do.