Fargo DTC-300 Thermal Card Printer "roller ring" Questions

...roller is driven by a small motor connected via an O-ring belt. The printer rolls the ribbon back and forth to locate the start of each color panel on the ribbon during printing and ribbon detection. ...

...Thanks, Carl first, try to calibrate the ribbon, if it does not work, you probably have worn out rollers, and possibly a broken o-ring. if you want more info, call us at 310-671-8018, thanks ...

...area? we are located in los angeles, if you would like to send the printer to us. mostly likely the rollers are worn out, or possibly a bad o-ring. our # is 310-671-8018 thanks ...

roller [3] is rotating, the retaining ring [1] becomes detached due to frictional resistance with the fixing spacer, and the fixing roller comes off as a result. A projection (P-2 [1]) is added to the

...making a loud noise. What is the fix? open Tray 1. Remove the paper feed roller. Remove the separation pad under the feed roller. You will see a small spring. Try to cut JUST ONE ring of this

...ring of missing material around the roller. It prints but leaves a stripe of toner that is not fused and rubs off. Do I need to replace the fuser unit, the roller, or something else? ...

...problem you need to replace fixing film. Also when the fixing film is replaced, replace the fixing cleaning roller and silicon roller bushings along with rubber conducting ring on the silicon

...ring stretched or broke. This causes irregular feed roller issues, ribbon breakage or misalignment of print registration. It is recommended to do a ribbon sensor calibration. This can be done through ...

...it to stay on? It sits loosely. Is it supposed to snap in or am I missing another part to hold it in? There should be a small metal ring that clips behind the roller. Has it fallen into the machine

...ring inside. I found where it was, but can't figure how to replace it. It sounds like you need to replace your paper pick roller. It is held on the shaft by some white plastic clips. You can pry the ...