Pitco Frialator 40CNG Deep Fryer "poor flame" Questions

...flame or poor flame quality and in turn will produce soot. Also, make sure that no air or ventilation is directed towards the flue riser, otherwise, the same will result, flames rolling back towards ...

...result in poor flame quality which will in turn produce carbon or soot inside the fire tubes. Check also the condition of the fire tubes inside, they should be free of carbon or soot deposit.

to low operating gas pressure. When the fryer receives lower than the nameplate rating gas pressure, the flame on burners will be of poor quality (yellow flame) which will in turn produce soot/ carbon

...poor pilot flame quality. The thermopile must be free of soot or soot form of dirt in order to detect the right amount of heat from the pilot flame so that it could also, in turn generate the right ...

...the flue indicates poor flame quality and probably carbon or soot build up on fire tubes. Have a technician check the gas pressure and the fire tubes for verification and cleaning if needed.

...poor flame quality which results in soot formation.. The type of gas must also be compatible with the orifice sizes on pilot and burners. Check and clean as needed all soot formation on burners and ...

clean the orifice hole using a smallest pin you can find, make sure that the hole will not be damaged or enlarge once you do this, otherwise, pilot flame quality will become poor and will produce soot

...gas pressure written on the nameplate. Check also the quality of pilot flame, poor pilot flame quality will not properly heat up the thermopile which in turn will result in poor fryer