Bosch Tassimo TAS4511UC Coffee Maker "machine light change" Questions

...was fine, I waited for the light to change colors, open the lid, put disc with the cream in the machine and the green light won't come on, only the yellow on the left hand side and is not ...

...machine not going to the green light mode ? When i clean my water tank and plug the cable to the power and switch on the device then i saw that the machine is in standby mode... it never go to the ...

the red light won't go off even after refilling the water tank and changing the filter Which red light? The descale light or the water level light? both are red. If the first, you need to go through ...

light you must let the machine quit on its own. The lights will change. Then do the rinse by replacing the water in the tank and closing and then reopening the steam knob and again letting the machine

...light, you must let the machine quit on its own. The pump has to stop on its own. Any interruption (you stopping the machine) will keep it in the descale mode. Once it stops on its own, the lights ...

light you must let the machine quit on its own. The lights will change. Then do the rinse by replacing the water in the tank and closing and then reopening the steam knob and again letting the machine

on our Incanto Rondo Looks like the change filter light Hello, Press and hold the hot water botton for 5 sec. and the light will go off; It will light after 1year again, to change the water filter; BR

...light, you must let the machine quit on its own. The pump has to stop on its own. Any interruption (you stopping the machine) will keep it in the descale mode. Once it stops on its own, the lights ...

...light. When resetting the machine to factory settings, it automatically changes the setting to 'hard' water. If you recently descaled the machine and are finding that the orange descaling light is ...

...light comes on, flashes for about 20seconds and goes out. Any suggestions how to fix it? Thanks in the machine there is small circuit board that control the machine so they programmed that circuit to ...