iRobot 53501 Roomba 500 Series Vacuum Cleaning Robot with SelfCharging Hom "clean roombas brushes" Questions

...clean Roombas brushes" So thinking that something was stuck I removed and cleaned the brushes, (yellow tabs on and in place by the way) Now when I press clean the hoover cleans for about 1 minute and ...

...clean roomba's brushes i do then runs for awhile and says same thing no dirt on brushes? I had the same problem. You must clean this parts and inside this parts: Remove hair with cleaning tool Remove ...

...clean Roomba s brushes warning will not stop after brushes have been cleaned Unit shuts off after one minute of cleaning Clean the yellow brush bearings. Then run the Roomba without the dustbin, so ...

...clean and now the pick up brushes start and stop during cleaning. The vaccum is clean but will not constantly spin. Runs great but pick up brushes start and stop. Is there a number for Roomba? ...

clean the brushes. I have cleaned the brushes and when I turn the roomba back on it keeps clicking underneath the roomba. I'm not sure what else to do. I had the identical problem. I cleaned the brush

...clean Roombas brushes" I have a roomba 530. It is making a clicking noise, and runs for about two minutes then stops stating, "Please Clean Roombas Brushes." This occurs even after the brushes have ...

clean brushes, but no dirt I have an Irobot Roomba 560 and is one week old. It work perfectly and suddenly it works for a minute or so and then stop, beep twice and give the "remove brushes and clean"

clean cycle. Hope this helps sure did help me just wanted to pass on good info as i came to me. Have a blessed day Wayne W. It should be seeing something in front of it so the Roomba avoids the place.

...clean Roombas brushes. I have cleaned the brushes...they are spotless. Still the Roomba will go for 2 minutes and shut itself off stating once again to clean the brushes. What up? Perform the ...

...brushes and ensure they turn easily with your fingers. Remove the yellow bearings and clean any dirt accumulated in the bearing cups. 7. Ensure that the brush sockets (on the opposite side of where ...