Question about Audio Players & Recorders
I have an ampeg tri ax vt 60. Probably from 80s. I need ANY information on wiring please. Its been taken apart HELP This does not sound like a motorcycle under which class it is posted. Maybe try ...
Question about Crown Audio Players & Recorders
Fault light on no sound to speakers removed cover blew out heavy dust system played 3mins then fault light came back on,its a crown xls 402 plz advise! It sounds like a thermal issue. Is it in fact ...
Question about NAD Audio Players & Recorders
NAD 7030 just stopped working on one channel. The speaker will work if the mono button is pressed in. Could this be a fuse problem ? most likely it will be poor soldering on the input side - the fact ...
Question about Cambridge Audio Audio Players & Recorders
One channel missing at switch on. Can be recovered by switch off, or A/B switch Could be caused by a dirty or faulty switch. Perhaps even a bad soldering joint? Servisol Switch Cleaner sprayed on ...
Question about Sony Audio Players & Recorders
my receiver turns on but no sound comes out. I know for a fact nothing is wrong with any other component. Hi there, Check the audio connection from unit to the system speaker, try to disconnect and ...
Question about Sony Audio Players & Recorders
will a sony 600watt amp run a 10 300watt 4 ohm sub? Yes, but the wattage numbers are pure marketing and have no bearing in reality or fact. In general, given realistic amplifier power specifications, ...
Question about JVC Audio Players & Recorders
Speaker distortion when amp is on for a couple of hours I have a JVC amp about 35 years old - 25w rms. It works well apart from the fact that recently after playing music (not loudly) for a couple of ...
sams photofact set-165 folder-9 Ineed this for an rca 45-ey-2 45 rpm record player I don't think Sam's Photo Facts are still in business. Try a Google search.
I have an old aiwa seperates system & I need a remote control for it. I dont know the model number of the controller but The amp is a mx-z5000m. can you help? Thanks, Kris. Replacement remotes are
Question about Audio Players & Recorders
i have kenwood amp m-a100 which has loud buzz / hum on all channels and distorts radio very badly can you help ? The loud hum will be probably caused by the Large Electrolytic Capacitors in the Power ...
10 questions posted
Usually answered in minutes!
46 Questions
32 Questions
12 Questions
12 Questions
15 Questions