LG 37LD450 37 in. TV "stuck 1 channell" Questions

...stuck on one (1) channel Receiving good signal. But the TV is stuck on one (1) channel. Can not change to other channels or the volume from either the controller or buttons on the TV. Is there a ...

STUCK ON CHANNEL 1 AND WONT SWITCH TO OTHER CHANNELS USING THE CHANNEL ARROWS ON THE REMOTE CONTROL Your TV is in Showroom Mode - to change: Menu>Picture>Mode>Power up>Home Then go back and autosearch

...stuck on 1 channel Try auto tuning. May the channel memory have been erased. If so it will no show other channels. If you wish to get some details; check the site linked here. Pull up older posts. ...

...1 the TV gets "stuck", it won't advance past the channel or go back to previous channel. Up until two days ago 7.1 did not present any problems at all. Not sure if this is a TV problem or a cable ...

1-5 miuntes of viewing IF YOU TAKE THE BATTERIES OUT OF THE REMOTE DOES THIS STILL OCCUR? I WOULD HAVE THE UNIT CHECKED BY A SERVICER. THE CHANNEL UP OR DOWN BUTTONS ON THE UNIT COULD BE STUCK. IF NOT

...1. One channel has really bad sound. Crackling and in and out. 2. Today the channels started rolling on their own. We can not make it stop. One channel with bad sound is most likely the station/cable ...

...1 look for a remote stuck in a couch(or other near place) that is barely peaking out enough to change the channel. 2. Check that the channel up or down button is not stuck on the tv and or any remote ...

stuck on this screen. I dont have the remote control. How do I do to access the HDMI channels or do a hard reset on the tv if necessary? allow the tv to go through the scan make sure there's an aerial

remote but still its changing them on its own Is it going one way - channel 1-2-3-4-5 bottom to up or any way at random. Find out which way and check the channel button on the TV to see if it is stuck

...1. Unplug tv 2. Unplug coax from tv 3. Plug tv back in 4. In the Menu go to Setup > CH setup > CH Memory > Cable (digital) 5. Enable channel skip for channel that it is currently stuck on 6. ...